Virtual Valve Museum

Virtual Valve Museum

HomeFull List

This is an archive website. It will not receive any updates, additions or corrections.

CV36 reflex klystron dismantled

Cavity asssembly
The cavity assembly, consisting of two main pieces plus two rings which are used to bolt the assembly to the two copper disks of the resonator. In the above picture, the top right and bottom left threaded slugs are used to pre-tune the cavity. The tuning plunger can be seen top left and the output would be taken bottom right.

Copper disks of the resonator
Above can be seen the two copper disks which form the resonator. Each has a glass/metal seal on each side.

Gun grid view Gun side view
The cathode and grid can be seen here.

Reflector Reflector side view
The reflector can be seen above.